This manual documents nxml-mode, an Emacs major mode for editing XML with RELAX NG support. This manual is not yet complete.
Apart from real-time validation, the most important feature that nxml-mode provides for assisting in document creation is "completion". Completion assists the user in inserting characters at point, based on knowledge of the schema and on the contents of the buffer before point.
The traditional GNU Emacs key combination for completion in a buffer is M-TAB. However, many window systems and window managers use this key combination themselves (typically for switching between windows) and do not pass it to applications. It's hard to find key combinations in GNU Emacs that are both easy to type and not taken by something else. C-RET (i.e. pressing the Enter or Return key, while the Ctrl key is held down) is available. It won't be available on a traditional terminal (because it is indistinguishable from Return), but it will work with a window system. Therefore we adopt the following solution by default: use C-RET when there's a window system and M-TAB when there's not. In the following, I will assume that a window system is being used and will therefore refer to C-RET.
Completion works by examining the symbol preceding point. This is the symbol to be completed. The symbol to be completed may be the empty. Completion considers what symbols starting with the symbol to be completed would be valid replacements for the symbol to be completed, given the schema and the contents of the buffer before point. These symbols are the possible completions. An example may make this clearer. Suppose the buffer looks like this (where ▲ indicates point):
<html xmlns="http://www.w3.org/1999/xhtml"> <h▲
and the schema is XHTML. In this context, the symbol to be completed
h. The possible completions consist of just
head. Another example, is
<html xmlns="http://www.w3.org/1999/xhtml"> <head> <▲
In this case, the symbol to be completed is empty, and the possible
title. Another example is:
In this case, the symbol to be completed is empty, and the possible
completions are just
When you type C-RET, what happens depends on what the set of possible completions are.
If the set of completions is empty, nothing happens.
If there is one possible completion, then that completion is inserted, together with any following characters that are required. For example, in this case:
<html xmlns="http://www.w3.org/1999/xhtml"> <▲
C-RET will yield
<html xmlns="http://www.w3.org/1999/xhtml"> <head▲
If there is more than one possible completion, but all possible completions share a common non-empty prefix, then that prefix is inserted. For example, suppose the buffer is:
The symbol to be completed is
x. The possible completions
xml:lang. These share a
common prefix of
xml. Thus, C-RET
Typically, you would do C-RET again, which would have the result described in the next item.
If there is more than one possible completion, but the possible completions do not share a non-empty prefix, then Emacs will prompt you to input the symbol in the minibuffer, initializing the minibuffer with the symbol to be completed, and popping up a buffer showing the possible completions. You can now input the symbol to be inserted. The symbol you input will be inserted in the buffer instead of the symbol to be completed. Emacs will then insert any required characters after the symbol. For example, if it contains:
Emacs will prompt you in the minibuffer with
and the buffer showing possible completions will contain
Possible completions are: xml:lang xmlns
If you input xmlns, the result will be:
(If you do C-RET again, the namespace URI will be inserted. Should that happen automatically?)
The main redundancy in XML syntax is end-tags. nxml-mode provides several ways to make it easier to enter end-tags. You can use all of these without a schema.
You can use C-RET after
to complete the rest of the end-tag.
C-c C-f inserts an end-tag for the element containing
point. This command is useful when you want to input the start-tag,
then input the content and finally input the end-tag. The
is mnemonic for finish.
If you want to keep tags balanced and input the end-tag at the
same time as the start-tag, before inputting the content, then you can
use C-c C-i. This inserts a
>, then inserts
the end-tag and leaves point before the end-tag. C-c C-b
is similar but more convenient for block-level elements: it puts the
start-tag, point and the end-tag on successive lines, appropriately
i is mnemonic for inline and the
b is mnemonic for block.
Finally, you can customize nxml-mode so that /
automatically inserts the rest of the end-tag when it occurs after
<, by doing
M-x customize-variable RET nxml-slash-auto-complete-flag RET
and then following the instructions in the displayed buffer.
Emacs has several commands that operate on paragraphs, most notably M-q. nXML mode redefines these to work in a way that is useful for XML. The exact rules that are used to find the beginning and end of a paragraph are complicated; they are designed mainly to ensure that M-q does the right thing.
A paragraph consists of one or more complete, consecutive lines. A group of lines is not considered a paragraph unless it contains some non-whitespace characters between tags or inside comments. A blank line separates paragraphs. A single tag on a line by itself also separates paragraphs. More precisely, if one tag together with any leading and trailing whitespace completely occupy one or more lines, then those lines will not be included in any paragraph.
A start-tag at the beginning of the line (possibly indented) may be treated as starting a paragraph. Similarly, an end-tag at the end of the line may be treated as ending a paragraph. The following rules are used to determine whether such a tag is in fact treated as a paragraph boundary:
If the schema does not allow text at that point, then it is a paragraph boundary.
If the end-tag corresponding to the start-tag is not at the end of its line, or the start-tag corresponding to the end-tag is not at the beginning of its line, then it is not a paragraph boundary. For example, in
<p>This is a paragraph with an <emph>emphasized</emph> phrase.
<emph> start-tag would not be considered as
starting a paragraph, because its corresponding end-tag is not at the
end of the line.
If there is text that is a sibling in element tree, then it is not a paragraph boundary. For example, in
<p>This is a paragraph with an <emph>emphasized phrase that takes one source line</emph>
<emph> start-tag would not be considered as
starting a paragraph, even though its end-tag is at the end of its
line, because there the text
This is a paragraph with an
is a sibling of the
Otherwise, it is a paragraph boundary.
nXML mode allows you to display all or part of a buffer as an outline, in a similar way to Emacs' outline mode. An outline in nXML mode is based on recognizing two kinds of element: sections and headings. There is one heading for every section and one section for every heading. A section contains its heading as or within its first child element. A section also contains its subordinate sections (its subsections). The text content of a section consists of anything in a section that is neither a subsection nor a heading.
Note that this is a different model from that used by XHTML.
nXML mode's outline support will not be useful for XHTML unless you
adopt a convention of adding a
div to enclose each
section, rather than having sections implicitly delimited by different
hn elements. This limitation may be removed
in a future version.
a regexp for the local names (i.e. the part of the name following any
prefix) of section elements. The variable
nxml-heading-element-name-regexp gives a regexp for the
local names of heading elements. For an element to be recognized
as a section
its start-tag must occur at the beginning of a line (possibly indented);
its local name must match
either its first child element or a descendant of that
first child element must have a local name that matches
nxml-heading-element-name-regexp; the first such element
is treated as the section's heading.
You can customize these variables using M-x customize-variable.
There are three possible outline states for a section:
normal, showing everything, including its heading, text content and subsections; each subsection is displayed according to the state of that subsection;
showing just its heading, with both its text content and its subsections hidden; all subsections are hidden regardless of their state;
showing its heading and its subsections, with its text content hidden; each subsection is displayed according to the state of that subsection.
In the last two states, where the text content is hidden, the heading is displayed specially, in an abbreviated form. An element like this:
<section> <title>Food</title> <para>There are many kinds of food.</para> </section>
would be displayed on a single line like this:
If there are hidden subsections, then a
+ will be used
instead of a
- like this:
If there are non-hidden subsections, then the section will instead be displayed like this:
<-section>Food... <-section>Delicious Food...</> <-section>Distasteful Food...</> </-section>
The heading is always displayed with an indent that corresponds to its
depth in the outline, even it is not actually indented in the buffer.
nxml-outline-child-indent controls how much
a subheading is indented with respect to its parent heading when the
heading is being displayed specially.
Commands to change the outline state of sections are bound to key sequences that start with C-c C-o (o is mnemonic for outline). The third and final key has been chosen to be consistent with outline mode. In the following descriptions current section means the section containing point, or, more precisely, the innermost section containing the character immediately following point.
C-c C-o C-a shows all sections in the buffer normally.
C-c C-o C-t hides the text content of all sections in the buffer.
C-c C-o C-c hides the text content of the current section.
C-c C-o C-e shows the text content of the current section.
C-c C-o C-d hides the text content and subsections of the current section.
C-c C-o C-s shows the current section and all its direct and indirect subsections normally.
C-c C-o C-k shows the headings of the direct and indirect subsections of the current section.
C-c C-o C-l hides the text content of the current section and of its direct and indirect subsections.
C-c C-o C-i shows the headings of the direct subsections of the current section.
C-c C-o C-o hides as much as possible without hiding the current section's text content; the headings of ancestor sections of the current section and their child section sections will not be hidden.
When a heading is displayed specially, you can use RET in that heading to show the text content of the section in the same way as C-c C-o C-e.
You can also use the mouse to change the outline state: S-mouse-2 hides the text content of a section in the same way asC-c C-o C-c; mouse-2 on a specially displayed heading shows the text content of the section in the same way as C-c C-o C-e; mouse-1 on a specially displayed start-tag toggles the display of subheadings on and off.
The outline state for each section is stored with the first character of the section (as a text property). Every command that changes the outline state of any section updates the display of the buffer so that each section is displayed correctly according to its outline state. If the section structure is subsequently changed, then it is possible for the display to no longer correctly reflect the stored outline state. C-c C-o C-r can be used to refresh the display so it is correct again.
nXML mode has a configurable set of rules to locate a schema for the file being edited. The rules are contained in one or more schema locating files, which are XML documents.
the list of the file-names of schema locating files that nXML mode
should use. The order of the list is significant: when file
x occurs in the list before file y then rules
from file x have precedence over rules from file
y. A filename specified in
rng-schema-locating-files may be relative. If so, it will
be resolved relative to the document for which a schema is being
located. It is not an error if relative file-names in
rng-schema-locating-files do not not exist. You can use
M-x customize-variable RET rng-schema-locating-files
RET to customize the list of schema locating
rng-schema-locating-files list has two
dist-dir is the directory containing the nXML
distribution. The first member will cause nXML mode to use a file
schemas.xml in the same directory as the document being
edited if such a file exist. The second member contains rules for the
schemas that are included with the nXML distribution.
The command C-c C-s C-w will tell you what schema is currently being used.
The rules for locating a schema are applied automatically when
you visit a file in nXML mode. However, if you have just created a new
file and the schema cannot be inferred from the file-name, then this
will not locate the right schema. In this case, you should insert the
start-tag of the root element and then use the command C-c
C-a, which reapplies the rules based on the current content of
the document. It is usually not necessary to insert the complete
start-tag; often just
If you want to use a schema that has not yet been added to the
schema locating files, you can use the command C-c C-s C-f
to manually select the file contaiing the schema for the document in
current buffer. Emacs will read the file-name of the schema from the
minibuffer. After reading the file-name, Emacs will ask whether you
wish to add a rule to a schema locating file that persistently
associates the document with the selected schema. The rule will be
added to the first file in the list specified
rng-schema-locating-files; it will create the file if
necessary, but will not create a directory. If the variable
rng-schema-locating-files has not been customized, this
means that the rule will be added to the file
in the same directory as the document being edited.
The command C-c C-s C-t allows you to select a schema by specifying an identifier for the type of the document. The schema locating files determine the available type identifiers and what schema is used for each type identifier. This is useful when it is impossible to infer the right schema from either the file-name or the content of the document, even though the schema is already in the schema locating file. A situation in which this can occur is when there are multiple variants of a schema where all valid documents have the same document element. For example, XHTML has Strict and Transitional variants. In a situation like this, a schema locating file can define a type identifier for each variant. As with C-c C-s C-f, Emacs will ask whether you wish to add a rule to a schema locating file that persistently associates the document with the specified type identifier.
The command C-c C-s C-l adds a rule to a schema locating file that persistently associates the document with the schema that is currently being used.
Each schema locating file specifies a list of rules. The rules from each file are appended in order. To locate a schema each rule is applied in turn until a rule matches. The first matching rule is then used to determine the schema.
Schema locating files are designed to be useful for other applications that need to locate a schema for a document. In fact, there is nothing specific to locating schemas in the design; it could equally well be used for locating a stylesheet.
There is a schema for schema locating files in the file
locate.rnc in the schema directory. Schema locating
files must be valid with respect to this schema.
The document element of a schema locating file must be
locatingRules and the namespace URI must be
children of the document element specify rules. The order of the
children is the same as the order of the rules. Here's a complete
example of a schema locating file:
<?xml version="1.0"?> <locatingRules xmlns="http://thaiopensource.com/ns/locating-rules/1.0"> <namespace ns="http://www.w3.org/1999/xhtml" uri="xhtml.rnc"/> <documentElement localName="book" uri="docbook.rnc"/> </locatingRules>
This says to use the schema
xhtml.rnc for a document with
http://www.w3.org/1999/xhtml, and to use the
docbook.rnc for a document whose local name is
book. If the document element had both a namespace URI
http://www.w3.org/1999/xhtml and a local name of
book, then the matching rule that comes first will be
used and so the schema
xhtml.rnc would be used. There is
no precedence between different types of rule; the first matching rule
of any type is used.
As usual with XML-related technologies, resources are identified
by URIs. The
uri attribute identifies the schema by
specifying the URI. The URI may be relative. If so, it is resolved
relative to the URI of the schema locating file that contains
attribute. This means that if the value of
does not contain a
/, then it will refer to a filename in
the same directory as the schema locating file.
uri rule locates a schema based on the URI of the
uri attribute specifies the URI of the
resource attribute can be used to specify
the schema for a particular document. For example,
<uri resource="spec.xml" uri="docbook.rnc"/>
specifies that that the schema for
pattern attribute can be used instead of the
resource attribute to specify the schema for any document
whose URI matches a pattern. The pattern has the same syntax as an
absolute or relative URI except that the path component of the URI can
* character to stand for zero or more characters
within a path segment (i.e. any character other
Typically, the URI pattern looks like a relative URI, but, whereas a
relative URI in the
resource attribute is resolved into a
particular absolute URI using the base URI of the schema locating
file, a relative URI pattern matches if it matches some number of
complete path segments of the document's URI ending with the last path
segment of the document's URI. For example,
<uri pattern="*.xsl" uri="xslt.rnc"/>
specifies that the schema for documents with a URI whose path ends
transformURI rule locates a schema by
transforming the URI of the document. The
attribute specifies a URI pattern with the same meaning as the
pattern attribute of the
uri element. The
toPattern attribute is a URI pattern that is used to
generate the URI of the schema. Each
* in the
toPattern is replaced by the string that matched the
* in the
resulting string is appended to the initial part of the document's URI
that was not explicitly matched by the
rule matches only if the transformed URI identifies an existing
resource. For example, the rule
<transformURI fromPattern="*.xml" toPattern="*.rnc"/>
would transform the URI
into the URI
file:///home/jjc/docs/spec.rnc. Thus, this
rule specifies that to locate a schema for a document
foo.xml, Emacs should test whether a file
foo.rnc exists in the same directory as
foo.xml, and, if so, should use it as the
documentElement rule locates a schema based on
the local name and prefix of the document element. For example, a rule
<documentElement prefix="xsl" localName="stylesheet" uri="xslt.rnc"/>
specifies that when the name of the document element is
xslt.rnc should be used
as the schema. Either the
localName attribute may be omitted to allow any prefix or
namespace rule locates a schema based on the
namespace URI of the document element. For example, a rule
<namespace ns="http://www.w3.org/1999/XSL/Transform" uri="xslt.rnc"/>
specifies that when the namespace URI of the document is
xslt.rnc should be used as the schema.
Type identifiers allow a level of indirection in locating the
schema for a document. Instead of associating the document directly
with a schema URI, the document is associated with a type identifier,
which is in turn associated with a schema URI. nXML mode does not
constrain the format of type identifiers. They can be simply strings
without any formal structure or they can be public identifiers or
URIs. Note that these type identifiers have nothing to do with the
DOCTYPE declaration. When comparing type identifiers, whitespace is
normalized in the same way as with the
datatype: leading and trailing whitespace is stripped; other sequences
of whitespace are normalized to a single space character.
Each of the rules described in previous sections that uses a
uri attribute to specify a schema, can instead use a
typeId attribute to specify a type identifier. The type
identifier can be associated with a URI using a
element. For example,
<locatingRules xmlns="http://thaiopensource.com/ns/locating-rules/1.0"> <namespace ns="http://www.w3.org/1999/xhtml" typeId="XHTML"/> <typeId id="XHTML" typeId="XHTML Strict"/> <typeId id="XHTML Strict" uri="xhtml-strict.rnc"/> <typeId id="XHTML Transitional" uri="xhtml-transitional.rnc"/> </locatingRules>
declares three type identifiers
XHTML (representing the
default variant of XHTML to be used),
XHTML Strict and
XHTML Transitional. Such a schema locating file would
xhtml-strict.rnc for a document whose namespace is
http://www.w3.org/1999/xhtml. But it is considerably
more flexible than a schema locating file that simply specified
<namespace ns="http://www.w3.org/1999/xhtml" uri="xhtml-strict.rnc"/>
A user can easily use C-c C-s C-t to select between XHTML Strict and XHTML Transitional. Also, a user can easily add a catalog
<locatingRules xmlns="http://thaiopensource.com/ns/locating-rules/1.0"> <typeId id="XHTML" typeId="XHTML Transitional"/> </locatingRules>
that makes the default variant of XHTML be XHTML Transitional.
include element includes rules from another
schema locating file. The behavior is exactly as if the rules from
that file were included in place of the
Relative URIs are resolved into absolute URIs before the inclusion is
performed. For example,
includes the rules from
The process of locating a schema takes as input a list of schema locating files. The rules in all these files and in the files they include are resolved into a single list of rules, which are applied strictly in order. Sometimes this order is not what is needed. For example, suppose you have two schema locating files, a private file
<locatingRules xmlns="http://thaiopensource.com/ns/locating-rules/1.0"> <namespace ns="http://www.w3.org/1999/xhtml" uri="xhtml.rnc"/> </locatingRules>
followed by a public file
<locatingRules xmlns="http://thaiopensource.com/ns/locating-rules/1.0"> <transformURI pathSuffix=".xml" replacePathSuffix=".rnc"/> <namespace ns="http://www.w3.org/1999/XSL/Transform" typeId="XSLT"/> </locatingRules>
The effect of these two files is that the XHTML
rule takes precedence over the
transformURI rule, which
is almost certainly not what is needed. This can be solved by adding
applyFollowingRules to the private file.
<locatingRules xmlns="http://thaiopensource.com/ns/locating-rules/1.0"> <applyFollowingRules ruleType="transformURI"/> <namespace ns="http://www.w3.org/1999/xhtml" uri="xhtml.rnc"/> </locatingRules>
nxml-mode is designed to support the creation of standalone XML documents that do not depend on a DTD. Although it is common practice to insert a DOCTYPE declaration referencing an external DTD, this has undesirable side-effects. It means that the document is no longer self-contained. It also means that different XML parsers may interpret the document in different ways, since the XML Recommendation does not require XML parsers to read the DTD. With DTDs, it was impractical to get validation without using an external DTD or reference to an parameter entity. With RELAX NG and other schema languages, you can simulataneously get the benefits of validation and standalone XML documents. Therefore, I recommend that you do not reference an external DOCTYPE in your XML documents.
One problem is entities for characters. Typically, as well as providing validation, DTDs also provide a set of character entities for documents to use. Schemas cannot provide this functionality, because schema validation happens after XML parsing. The recommended solution is to either use the Unicode characters directly, or, if this is impractical, use character references. nXML mode supports this by providing commands for entering characters and character references using the Unicode names, and can display the glyph corresponding to a character reference.
nXML mode has some limitations:
DTD support is limited. Internal parsed general entities declared in the internal subset are supported provided they do not contain elements. Other usage of DTDs is ignored.
The restrictions on RELAX NG schemas in section 7 of the RELAX NG specification are not enforced.
Unicode support has problems. This stems mostly from the fact that the XML (and RELAX NG) character model is based squarely on Unicode, whereas the Emacs character model is not. Emacs 22 is slated to have full Unicode support, which should improve the situation here.